The FoxFury DJI Avata 2 Lighting System features a custom saddle with two side mounted D10 lights and one top mounted D3060 light, all of which are proudly made in the USA. This solution is designed specifically for the DJI Avata 2.
Made to support the public safety sector, the Avata 2 system shines in low light and no light situations. FoxFury designed this light kit to clip on to the drone and stay secure during a variety of flight scenarios. We incorporated our well-known, powerful D3060 as the forward facing light on top of the Avata 2, and two lightweight D10's for downward
facing lights to assist with the sensors.
All 3 lights rotate 360 degrees for optimum light placement. The D10's 30° LED beam pattern operates on continuous or strobe light modes. D3060 is a multi-function utility light with 30° and 60° dual LEDs, which can operate with a high, low, or strobe mode to provide omnidirectional lighting. Both lights are rechargeable, splashproof, durable, compact and suitable for a variety of uses where light is needed in a tight space.
Strobe meets FAA & Global Night Flight Requirements.
Compatibility
DJI Avata 2
In the Box
1 - DJI Avata 2 Mount
2 - D10 Light Head
2 - Micro USB Cable
1 - D3060 Light Head
1 - USB-C Cable
1 - D Series Flat Mounting Pad
1 - 5915 VHB Tape
Specifications
D10 Light
| Lumens |
On (200 lumens), Strobe (200 lumens) |
| Battery Type |
Rechargeable LiPo battery (3.7V, 200 mAh) |
| Battery Recharge Time |
1 hour |
| Adaptor Input |
Micro USB |
| Rechargeable |
Yes |
| Charging Temperature |
32°F to 113°F (0°C to 45°C) |
| Battery Life |
On (30-40 min), Strobe (60-80 min) |
| LED Color |
White |
| Color Temperature |
5000K, CRI 90 |
| Modes |
On, Strobe - 1.5Hz (30% duty cycle) or 90 cycles per minute |
| Light Dimensions |
1.07 x 0.77 x 1.4 in (27.3 x 19.5 x 36 mm) |
| Light - Weight |
0.42 oz (12 g) |
| Beam Angle |
30° |
| Operational Beam Distance |
65 ft (20 m) |
| Fire Resistant |
Meets NFPA Requirements |
| Impact Resistant |
9.8 ft (3 m) drop |
| Water Resistant |
Splash proof |
| Weight, Mount |
0.33 oz (9.4 g) |
| Certification |
CE |
| Materials |
Nylon and Carbon Fiber Polycarbonate Lens |
| D3060 Light |
|
| Lumens |
Front Light (30°): 200 lumens (high), 60 lumens (low); Dorsal Light (60°): 160 lumens (high), 50 lumens (low) |
| Front Light Strobe |
200 lumens (high) |
| Dorsal Light Strobe |
160 lumens (high) |
| Battery Type |
Rechargeable LiPo battery (3.7V, 560 mAh) |
| Battery Recharge Time |
1.5 hours |
| Adaptor Input |
USB-C |
| Battery Life |
Front Light: 1 hour (high), 3 hours (low); Dorsal Light: 1.5 hours (high), 3 hours (low) |
| Strobe light: Front or Dorsal |
4.0 hours (Front) | 5.0 hours (Dorsal)High |
| Front High & Dorsal Low |
1 hour |
| Both Low |
1.5 hours |
| Both Strobe |
4 hours |
| LED |
White |
| Color Temperature & CRI |
5000K, CRI 90 |
| Modes |
High, Low, Strobe: 1.5Hz (30% duty cycle) or 90 cycles per minute |
| Beam Angles |
30° (Front), 60° (Dorsal) |
| Operational Beam Distance |
Front Light (30°): 65 ft = 20 m; Dorsal Light (60°): 40 ft = 12 m |
| Dimensions, Light |
1.3 x 2.3 x 0.9 in (33 x 58 x 23 mm) |
| Light Weight |
1.1 oz (31.2 g) |
| Ingress Protection |
IPX6 |
| Materials |
Polycarbonate Body, Nylon Rear, Silicone Switch, |
| DJI Avata 2 Mount |
|
| Dimensions |
2.3 x 1.83 x 1.56 in (58.8 x 46.5 x 39.5 mm) |
| Weight |
0.4 oz (11.6 g |
| Fire Resistant |
Meets NFPA Requirements |
| Impact Resistant |
9.8 ft (3 m) drop |
| Materials |
Nylon and Carbon Fiber |
|
D Series Flat Mounting Pad
|
|
| Dimensions |
1.06 x 1.14 x 0.2 in (27 x 29 x 5 mm) |
| Weight |
0.06 oz (1.7 g) |
| Fire Resistant |
Meets NFPA Requirements |
| Impact Resistant |
9.8 ft (3 m) drop |
| Materials |
Nylon and Carbon Fiber |
